Powerful adhesion and uncompromising safety for carefree family fun! The red replacement magnetic dart arrows are the perfect addition or ideal replacement for your existing magnetic dartboard. Since these darts are completely free of sharp needles, they allow for absolutely risk-free gaming fun with the family, at children's birthday parties, or in the office, without leaving holes in walls or floors. Safe flat-head magnet technology: Instead of a dangerous steel or plastic tip, these darts feature an extremely strong neodymium flat-head magnet that adheres instantly and reliably upon hitting metallic boards. Balanced flight characteristics: Despite the safe design, the darts are aerodynamically optimally balanced and offer stable flight behavior, enabling precise aiming at double and triple segments. Robust material composition: The durable plastic body and flexible flights easily withstand harder drops to the floor and guarantee a long service life in daily use. High-visibility signal color: Thanks to the bright red, the darts are highly visible on the dartboard as well as on the floor at all times, making counting points and collecting them noticeably easier. Specifications: Body material: Durable special plastic Tip material: Powerful flat-head magnet Color: Red Compatibility: Suitable for all standard magnetic dartboards Scope of delivery: 1 x set of replacement magnetic dart arrows (3 pieces, color: red) The Tip: These safe replacement darts provide a lasting supply for your game corner or right next to the billiard table. To ensure maximum magnetic force and thus flawless adhesion to the board, it is recommended to occasionally clean the metallic surface of the flat head with a dry cloth to remove dust or fine debris. If the flights should become slightly bent after intensive matches, they can easily be reshaped back into the perfect aerodynamic cross shape with your fingers. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.

Rock-solid hold and easy installation for your Winmau dartboard! This universal dartboard mounting bracket offers the perfect technical solution for mounting your steel dartboard securely, stably, and absolutely wobble-free to the wall. Thanks to the proven two-component system, the board hangs centered and secure after installation, allowing you to focus completely on your throw and scoring. Secure two-component system: The set consists of a robust wall bracket and a perfectly fitting countersunk screw, which is screwed directly into the back of the dartboard and hooks securely into the bracket with a positive fit. Prevents annoying rotation: Thanks to the wedge-shaped guide of the wall plate, the board sits firmly in the center once hooked in. Distracting wobbling, slipping, or rotating when pulling out the darts is effectively prevented. Easy readjustment: When you want to rotate the board for even wear, it can easily be lifted upwards out of the bracket to realign the desired position (e.g., the Triple 20). Universal compatibility: The bracket is made of durable, heavy-duty metal and is suitable for all standard tournament sisal dartboards (bristle boards) from well-known manufacturers such as Winmau, Unicorn, or Karella. Specifications: Material: Robust, galvanized steel Wall plate dimensions: approx. 8.5 x 9.5 cm Compatibility: Suitable for all standard sisal and bristle dartboards Scope of delivery: 1 x metal wall bracket 1 x centering screw (for the back of the board) 3 x mounting screws (for wall installation) 3 x plastic spacers (for vibration and noise dampening) The Tip: An absolutely stable wall mounting is the basic prerequisite for a precise gaming experience right next to your billiard table. Be sure to use a spirit level when installing the wall plate to guarantee perfectly level alignment. The included spacers are fixed to the back of the board – they not only perfectly compensate for minor unevenness in the wall, but also have a sound-dampening effect by noticeably reducing the impact noise of the darts. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.

Durable design and precise specifications for an official tournament atmosphere and maximum sure-footedness at your throw point The Winmau Oche (throw line) is the essential foundation for every ambitious dart player who values precision and regulatory compliance. Made from particularly robust and durable special material, this high-quality floor decal marks the exact throwing distance for steel darts and soft darts. Thanks to its striking design in the classic Winmau look, it instantly transforms any room into a professional dart station. Official tournament distances at a glance: The line features precisely integrated markings for steel dart distance (237 cm) as well as specifications for soft darts. This enables error-free positioning and guarantees competition-ready training conditions. Extremely robust surface structure: The special coating is designed for heavy-duty use. It is abrasion-resistant, withstands intensive training with many players, and retains its clear appearance over a long period. Non-slip and secure adhesion: Thanks to the high-quality adhesive backing, the line can be fixed rock-solid to almost all smooth and clean floor coverings (such as laminate, tile, or PVC) without bubbling or slipping. Classic Winmau branding: The timeless design in the brand's signature colors emphasizes the athletic aspirations of your gaming station and provides an appealing look in your hobby room or clubhouse. Specifications: Material: High-quality, durable, and self-adhesive plastic Dimensions: approx. 59 x 10 cm (L x W) Markings: Precise indication of the official tournament distance (237 cm) Surface: Anti-slip and abrasion-resistant Suitability: Ideally suited for use with steel darts and soft darts Scope of delivery: 1 x Winmau throw line (self-adhesive) The Tip: This professional throw line is the perfect athletic addition to your gaming area and, as a clear point of orientation, harmonizes brilliantly right next to your billiard table. To ensure maximum adhesive strength, the floor should be thoroughly cleaned of dust, grease, and dirt and completely dried before applying. Always measure the distance of 237 cm directly from the plumb line of the front of the board (not from the wall!) to the front edge of the line. This ensures that you are training under the exact same conditions as the pros on the TV stage. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.

The reliable and long-lasting power supply for absolutely constant and secure operation of your dart machine The original Karella power adapter guarantees a stable power supply and is the perfect solution for replacing a defective or lost power cable for your electronic dartboard. Specifically tuned to the technical requirements of Karella model series, it protects the sensitive electronics and sensor foil from dangerous voltage fluctuations. The robust housing and reinforced cable strain relief easily withstand daily wear and tear in the hobby room or clubhouse. Thanks to the precisely fitting connector, the power supply sits absolutely wobble-free in the device's socket, ensuring a smooth, carefree dart match without sudden system dropouts. Constant voltage: Provides a uniform power supply that effectively prevents malfunctions of the digital scoreboard or sound dropouts. Integrated protection: Equipped with a modern safety mechanism against short circuits, overheating, and dangerous surges. High compatibility: A universal replacement for the most common electronic dartboards from Karella. Robust workmanship: The durable cable and stable plug guarantee a long service life and maximum contact reliability. Specifications: Type: AC/DC power adapter / power cable for dart machines Compatibility: Suitable for Karella CB-25, CB-50, CB-90, and Karella Premium Silver Connector: Device-specific barrel plug with optimal fit Application: Connection to standard household wall outlets Scope of delivery: 1 x Karella power adapter including integrated power cable Tip: Always connect the power adapter to the dart machine first before plugging it into the wall outlet to avoid minimal sparking when connecting. If you are not using your board for a longer period or going on vacation, it is recommended to disconnect the power adapter completely from the mains to protect the electronics from potential lightning strikes or power surges in the house network. Route the thin power cable flat along the wall or in a small cable duct so that it does not accidentally become a tripping hazard or get damaged when retrieving darts.

The highly sensitive and precisely fitting sensor matrix for absolutely error-free and lightning-fast scoring of your dart machine The original Karella matrix sheet is the electronic heart of the CB-50 and CB-90 dart machines and ensures that every one of your throws is registered exactly. If the scoreboard glitches, segments stop responding, or miscalculations disrupt the match, this precisely fitting replacement restores the machine's full performance. Equipped with sophisticated conductive tracks and extremely durable contact points, the foil reacts precisely to the mechanical pressure impulse of incoming soft darts. Thanks to its exact tuning to the electronics of the Karella models, the spare part can be mounted with precision, allowing your dart station to operate at a professional tournament level again immediately. Exact impulse transmission: The fine, highly conductive sensor tracks guarantee error-free registration of all segments in fractions of a second. Outstanding durability: Manufactured from a robust, flexible carrier material that effortlessly withstands the permanent stresses of daily play. Optimal fit: Absolutely identical to the factory-installed foil for uncomplicated and secure replacement. Reliable contact security: Effectively prevents annoying counting errors or dropouts on single, double, and triple hits. Specifications: Type: Electronic sensor sheet (matrix) for dart machines Compatibility: Exactly fits Karella CB-50 and Karella CB-90 Material: Highly flexible carrier foil with specialized conductive contact layers Function: Electronic detection and transmission of mechanical dart hits Scope of delivery: 1 x Karella matrix sheet (sensor foil) Tip: Before installation, be sure to disconnect the dart machine completely from the power supply to protect the sensitive circuit boards from static electricity or short circuits. When changing the foil, thoroughly clean the backs of the plastic segments as well as the rubber mat with a soft, dry cloth to remove dust and remnants of broken tips. When placing the new matrix, ensure meticulously that it lies completely flat and without kinks or offsets on the mount, so that the ribbon cable plugs into the mainboard without tension and all contacts trigger evenly.

Compact fun and maximum safety for the whole family or the office The Karella mini magnetic dartboard set brings the fascination of dart sports into any room in a handy, compact format, completely free of any danger. Since the included darts are completely free of sharp needles, this versatile set is ideal for children, spontaneous matches at the workplace, or as an entertaining travel game, without leaving holes in walls or furniture. Safe magnetic tip technology: Instead of a dangerous steel or plastic tip, the darts have an extremely strong flat-head magnet that adheres securely upon hitting the board, completely eliminating any risk of injury. Compact miniature format: Due to its reduced dimensions, the board takes up hardly any space and can be flexibly mounted on doors, cabinets, or small wall areas to provide quick entertainment anywhere. Classic segment look: Despite the reduced size, the graphic design corresponds to the traditional tournament board with 20 segments, double and triple rings, as well as the bullseye, so all classic dart variants can be played without restrictions. Specifications: Board material: High-quality plastic with an integrated, magnetic metal plate Dart material: Plastic body with a powerful magnetic flat head Design: Compact mini version in a classic tournament board design Safety: Completely hazard-free due to blunt magnetic tips, also ideal for younger children Scope of delivery: 1 x Karella mini magnetic dartboard 3 x Magnetic darts The Tip: This uncomplicated mini set is the perfect playful addition to any dart corner or right next to a billiard table. Thanks to its minimal weight, the board can be fixed in no time with a simple hanger and stowed away just as quickly if necessary. To maintain the maximum adhesive force of the magnetic darts long-term, it is recommended to occasionally clean the smooth surface of the board with a dry cloth to remove fine dust. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.

The highly sensitive and precisely fitting sensor matrix for absolutely error-free and lightning-fast scoring of your dart machine The original Karella matrix sheet is the electronic heart of the CB-25 dart machine and ensures that every one of your throws is registered exactly. If the scoreboard glitches, segments stop responding, or miscalculations disrupt the match, this precisely fitting replacement restores the machine's full performance. Equipped with sophisticated conductive tracks and extremely durable contact points, the foil reacts precisely to the mechanical pressure impulse of incoming soft darts. Thanks to its exact tuning to the electronics of the Karella CB-25, the spare part can be mounted with precision, allowing your dart station to operate at a professional level again immediately. Exact impulse transmission: The fine, highly conductive sensor tracks guarantee error-free registration of all segments in fractions of a second. Outstanding durability: Manufactured from a robust, flexible carrier material that effortlessly withstands the permanent stresses of daily play. Optimal fit: Absolutely identical to the factory-installed foil for uncomplicated and secure replacement. Reliable contact security: Effectively prevents annoying counting errors or dropouts on single, double, and triple hits. Specifications: Type: Electronic sensor sheet (matrix) for dart machines Compatibility: Exactly fits the Karella CB-25 Material: Highly flexible carrier foil with specialized conductive contact layers Function: Electronic detection and transmission of mechanical dart hits Scope of delivery: 1 x Karella CB-25 matrix sheet (sensor foil) Tip: Before installation, be sure to disconnect the dart machine completely from the power supply to protect the sensitive circuit boards from static electricity or short circuits. When changing the foil, thoroughly clean the backs of the plastic segments as well as the rubber mat with a soft, dry cloth to remove dust and remnants of broken tips. When placing the new matrix, ensure meticulously that it lies completely flat and without kinks or offsets on the mount, so that the ribbon cable plugs into the mainboard without tension and all contacts trigger evenly.

The highly sensitive and precisely fitting sensor matrix for error-free and lightning-fast scoring of your premium dart machine The original Karella matrix sheet is the electronic heart of the Premium Silver dart machine and ensures that every one of your throws is registered exactly. If the scoreboard glitches, segments stop responding, or miscalculations disrupt the match, this precisely fitting replacement restores the machine's full performance. Equipped with sophisticated conductive tracks and extremely durable contact points, the foil reacts precisely to the mechanical pressure impulse of incoming soft darts. Thanks to its exact tuning to the high-end electronics of the Premium model, the spare part can be mounted with precision, allowing your dart station to operate at a professional level again immediately. Exact impulse transmission: The fine, highly conductive sensor tracks guarantee error-free registration of all segments in fractions of a second. Outstanding durability: Manufactured from a robust, flexible carrier material that effortlessly withstands the permanent stresses of daily play. Optimal fit: Absolutely identical to the factory-installed foil for uncomplicated and secure replacement in the Premium Silver. Reliable contact security: Effectively prevents annoying counting errors or dropouts on single, double, and triple hits. Specifications: Type: Electronic sensor sheet (matrix) for dart machines Compatibility: Exactly fits the Karella Premium Silver dart machine Material: Highly flexible carrier foil with specialized conductive contact layers Function: Electronic detection and transmission of mechanical dart hits Scope of delivery: 1 x Karella Premium Silver matrix sheet (sensor foil) Tip: Before installation, be sure to disconnect the dart machine completely from the power supply to protect the sensitive circuit boards from static electricity or short circuits. When changing the foil, thoroughly clean the backs of the plastic segments as well as the rubber mat with a soft, dry cloth to remove dust and remnants of broken tips. When placing the new matrix, ensure meticulously that it lies completely flat and without kinks or offsets on the mount, so that the ribbon cable plugs into the mainboard without tension and all contacts trigger evenly.

Compact party fun and an original skill challenge for young and old The Karella Magnet Dartboard Mini brings a breath of fresh air and plenty of fun to every game session with its unique bottle cap design. Conceived as an original combination set, it unites classic dart sports with an entertaining game of skill where, in addition to magnetic darts, standard bottle caps are used as throwing material. Two thrilling game variants: The board offers double the play value – use either the classic, absolutely safe magnetic darts or challenge your skills by trying to place the included bottle caps on the board at the perfect angle. Strong magnetic foil equipment: The board is covered with a highly efficient magnetic foil that reliably and immediately holds both the flattened dart tips and the metallic bottle caps upon impact. Authentic miniature design: Despite its compact diameter of 23 cm, the vibrant print in the traditional bristle look corresponds exactly to the original tournament layout, ensuring all well-known dart game modes are fully playable. Maximum flexibility in setup: Thanks to the practical hanging mechanism and the integrated, foldable stand, the board can be flexibly mounted on the wall, placed on a table, or easily set up on the floor. Specifications: Diameter: approx. 23 cm Material: High-quality plastic with strong magnetic foil Design: Classic bristle look in a distinctive bottle cap format Safety: Completely hazard-free due to blunt magnetic tips, ideal for children as well Scope of delivery: 1 x Karella Magnet Dartboard Mini 6 x Darts with blunt magnetic tips (2 sets of 3 pieces each) 6 x Metal bottle caps The Tip: This compact magnetic board is the perfect party highlight, a fun gift idea for dart enthusiasts, and a real eye-catcher in the office or billiard hobby room. While throwing the safety darts is quickly learned, aiming with the bottle caps provides a real thrill and requires a surprising amount of finesse. To maintain full magnetic performance long-term, it is sufficient to occasionally clean the smooth surface of the board with a slightly damp cloth to remove dust. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.

The professional and highly stable dart throwing line made of high-quality wood for an absolutely non-slip stance and precise distance control The Karella Oche Ultimo is the perfect solution for ambitious dart players who demand maximum precision and consistency with every throw. Instead of using simple floor stickers that peel off or mats that slip, this professional oche relies on a solid, raised wooden construction. With an official height of 3 cm, it forms a tangible mechanical barrier that makes it impossible to accidentally step over the throwing line. The surface is provided with an extremely durable, matte black protective laminate that effortlessly withstands intensive use by footwear. Thanks to the well-thought-out rubber pads on the underside, the oche lies absolutely non-slip on almost all floor coverings and can be stowed away just as quickly and without leaving any residue if necessary. Tangible throwing edge: The striking elevation allows for the exact positioning of the standing foot without having to turn your gaze away from the dartboard. Absolutely non-slip: Special anti-slip elements on the underside guarantee a rock-solid hold with every single step and throw. First-class material thickness: The robust real wood core construction ensures maximum dimensional stability and prevents bending or warping. Elegant tournament setup: The matte, puristic design in black blends discreetly into any hobby room, basement, or league venue. Specifications: Type: Raised dart throwing line (oche) Material: Solid, stable wooden core with a durable special coating Color: Matte black Dimensions: Approx. 60 cm (width) x 3 cm (height) Scope of delivery: 1 x Karella Oche Ultimo (including pre-mounted anti-slip pads) Tip: Always measure the official tournament distance of exactly 2.37 meters diagonally from the center of the bullseye to the rear edge of the oche. To achieve an absolutely perfect result, you can additionally drop a plumb line from the bullseye to the floor and measure the distance flat along the floor from this point. Place the Oche Ultimo exactly centered to the axis of your dartboard. If you use the oche on a very smooth tile or laminate floor, briefly clear the area of fine dust before placing it down to retrieve the maximum adhesion of the integrated rubber pads and secure an absolutely wobble-free foundation for your signature throw.

The professional and highly stable wall mount for an absolutely wobble-free dartboard and alignment in seconds The Deluxe dartboard bracket is the perfect solution for all dart players who demand the highest standards of stability and precision. Unlike simple standard mounts, this premium system fixes the sisal board absolutely rigidly to the wall, effectively preventing annoying wobbling or twisting when retrieving arrows. The well-thought-out two-part system consists of a robust wall plate and a precisely fitting circular disc that is mounted on the back of the dartboard. Thanks to the integrated adjustment screws, the board can be easily aligned exactly after hanging and locked firmly in place, which not only maximizes playing comfort but also extends the life of your board by allowing for even rotation of the segments. Absolutely wobble-free fit: The clever locking system eliminates any play and ensures a stable, professional throwing feel just like on TV. Precise adjustment: Integrated adjustment mechanisms allow for subsequent fine-tuning of the board to perfectly compensate for unevenness in the wall. Solid metal construction: Made of heavy, durable steel for maximum load capacity and lasting dimensional stability during intensive use. Comfortable rotation: Allows for uncomplicated and quick rotation of the dartboard to regularly relieve the highly stressed segments, such as the single 20. Specifications: Type: Professional heavy-duty dartboard wall mount Material: High-quality, powder-coated steel Compatibility: Universally suitable for all standard sisal dartboards (e.g., Winmau, Unicorn, Target) Application: Professional installation in clubhouse or demanding home settings Scope of delivery: 1 x Wall mounting plate 1 x Board mounting disc (including central screw for the back of the board) 1 x Set of mounting screws and wall plugs for wall installation Tip: Be sure to use a spirit level during installation to align the wall plate perfectly horizontally before drilling the holes. Since the official height to the center of the bullseye is exactly 1.73 meters, measure this point carefully and consider the geometry of the mount when marking. If you rotate your dartboard regularly to distribute segment wear, this Deluxe system allows you to simply loosen the locking interface, rotate the board to the desired position, and realign the outer number ring—the board itself remains securely hung on the wall.

The highly elastic and precisely fitting damping mat for optimal electronics protection and first-class noise reduction for your dart machine The original Karella rubber protective mat for the E-Master dart machine is the indispensable link between the mechanical plastic segments and the sensitive electronic sensor matrix. It fulfills a crucial dual function: First, it absorbs the hard impact energy of incoming soft darts and distributes the pressure evenly to protect the matrix foil from mechanical damage and overloading. Second, the highly elastic rubber material ensures effective sound insulation, noticeably reducing the noise level during dart impact. Thanks to its absolutely precise fit, the mat can be installed accurately during maintenance, ensuring your tournament device immediately returns to operation with optimal damping and maximum operational reliability. Optimal matrix protection: Reliably protects the fine conductive paths of the sensor foil from point-specific overloads and premature wear. Effective noise reduction: Reduces the impact sounds of the darts for a more pleasant and quieter gaming experience in the clubhouse or hobby room. First-class material quality: Manufactured from a durable, dimensionally stable, and permanently elastic rubber that withstands even intensive continuous use. Perfect fit: Absolutely identical to the factory-installed mat of the E-Master for a play-free and smooth installation. Specifications: Type: Rubber protective mat / damping mat for dartboards Compatibility: Exactly fits the Karella E-Master dart machine Material: Highly elastic, durable special rubber Function: Shock absorption, electronics protection, and noise reduction Scope of delivery: 1 x Karella E-Master rubber protective mat Tip: Always disconnect the dart machine completely from the power supply before opening the housing to protect the electronic components from static electricity. When removing the old mat, take the opportunity to carefully clean the back of the segments and the sensor foil with a dry, soft cloth to remove fine dust or broken tip remnants. When placing the new rubber mat, meticulously ensure that it lies completely flat, free of dust, and without any misalignment so that all segments can slide smoothly and every hit impulse is transmitted absolutely evenly to the matrix.

The precisely fitting and robust replacement segments for quick repair and lasting scoring accuracy of your electronic dartboard The original Karella replacement segments are the perfect solution for quickly replacing sections of your electronic dartboard that have become worn or damaged through intensive training sessions. Manufactured from an extremely durable and highly elastic plastic, they reliably absorb the impact of incoming soft darts and minimize annoying bouncers. The precisely engineered hole matrix ensures exact penetration of the dart tips and guarantees error-free signal transmission to the electronic contact sheet of the machine. Thanks to their precise alignment with popular Karella models, the replacement process can be carried out with minimal effort, ensuring your dart station is back to full operational readiness immediately. Highest material quality: The specialized plastic is extremely durable, splinter-proof, and permanently withstands even the harshest stresses. Optimized hole geometry: Ensures easy penetration of plastic tips and prevents broken tips from becoming stuck. Perfect fit: Absolutely identical to the original parts of the Karella series for seamless and play-free insertion into the matrix. Cost-efficient maintenance: Allows for the targeted replacement of individual segments, eliminating the need to replace the entire dartboard. Specifications: Type: Replacement segments for electronic dartboards Compatibility: Suitable for Karella CB-25, CB-50, and CB-90 Material: Impact-resistant, elastic plastic Version: Available as single, double, triple, or bullseye segment (depending on selection) Scope of delivery: 1 x Karella replacement segment for dartboards CB-25, CB-50, and CB-90 Tip: Before opening the dartboard housing for the replacement, ensure the device is disconnected from the power supply to protect the sensitive electronics. Use the opportunity while changing a segment to carefully clean the underlying sensor sheet (matrix) of any remnants of broken tips or dust using a soft, dry brush. When reassembling, ensure that all segments sit completely flush in their guides and move easily so that the contacts trigger perfectly upon impact, preventing registered "misses."

The stylish and practical holder for the secure and accessible presentation of your darts The Winmau Dart Dock is the ideal solution for all dart players who want to stylishly showcase their darts while maintaining order at their dart station. This compact holder has been specifically designed to securely accommodate up to three fully assembled darts without bending the flights or damaging the tips. Manufactured from a robust, non-slip material, the dock ensures a firm stance on any flat surface, whether on a table, shelf, or directly below the dartboard. Thanks to its striking and iconic Winmau design, this holder fits seamlessly into any modern gaming or club room and reliably protects your equipment from falling. Secure storage: Protects tips, shafts, and flights from unnecessary wear and damage when not in use. Perfect presentation: Holds up to three darts ready for play in an upright, aesthetic manner for easy access at all times. Compact & stable: Occupies minimal space and provides excellent tip-resistance due to its well-engineered weight. Universal fit: Suitable for both soft-tip and steel-tip darts of all weight classes and brands. Specifications: Type: Tabletop dart holder Capacity: 3 darts (1 complete set) Color: Black with Winmau branding Compatibility: Universal for steel and soft-tip darts Scope of delivery: 1 x Winmau Dart Dock holder (delivery does not include darts) Tip: Place the dock directly next to your scoreboard or tablet used for score tracking to safely and quickly stow your darts during breaks or when analyzing statistics. If you own multiple sets of darts for different throwing styles, multiple docks can be arranged side-by-side to create a clean and professional look. Place the holder on a clean, dust-free surface to fully utilize the optimal grip of the non-slip base.

The professional and easy-to-wipe scoreboard for precise and clear scorekeeping in every dart match The Winmau scoreboard is the indispensable companion for every dart enthusiast who wants to record their game results in a traditional and clear way. Equipped with a robust and durable whiteboard finish, this scorerboard allows for quick recording and lightning-fast wiping of scores. The clever layout is specifically optimized for classic 501 or 301 games and offers separate columns for legs and sets for both players, as well as a practical display for remaining points. Whether in your home dart cellar or during intensive club play, this scoreboard—stylishly designed with original Winmau branding—ensures absolute clarity and prevents annoying calculation errors during the match. Optimized layout: Clear column breakdown for two players or teams, including separate zones for set and leg scoring. Wipeable without residue: The high-quality special coating allows for the use of standard whiteboard markers and can be cleaned dry. Stylish design: Features the striking Winmau branding, which visually matches any dartboard setup perfectly. Simple mounting: Thanks to the pre-prepared mounting points, the board can be attached effortlessly and stably to the wall at an optimal eye level. Specifications: Type: Dart scorerboard / writing board Surface: Dry-erase whiteboard coating Dimensions: Approx. 46 cm x 36 cm Use: Suitable for non-chalk whiteboard markers Scope of delivery: 1 x Winmau Scorerboard (delivery does not include mounting hardware or markers) Tip: Ideally, mount the board to the right or left of your surround at eye level so that the scorer can update the score without crossing the players' throwing line or obstructing the view of the board. For cleaning, use a special whiteboard cloth or felt eraser to avoid scratches on the surface. If you accidentally leave the scores on the board overnight after a long night of darts, a tiny drop of glass cleaner will help to remove even dried-on marker residue completely without leaving any trace.

The precisely fitting and splinter-free replacement segments for quick repair and flawless scoring of your premium dart machine The original Karella replacement segments for the Premium Silver dart machine are the ideal solution for specifically renewing heavily used or damaged sections of your tournament board. Manufactured from an extremely durable, highly elastic special plastic, they effortlessly absorb the hard impact of soft darts and reduce bouncers to an absolute minimum. The precisely formed hole matrix ensures optimal hold for plastic tips and ensures that every hit is transmitted precisely to the electronic matrix. Thanks to their precise manufacturing, the segments fit seamlessly into the existing board, ensuring that the professional look and top-class playing feel of your dart station are fully preserved. Robust material mix: The durable plastic is particularly dimensionally stable, splinter-free, and designed for continuous, intensive use. Precise hole matrix: Guarantees excellent dart penetration and facilitates the residue-free removal of broken tips. Seamless integration: Precisely matched to the geometry and specific tolerances of the Karella Premium Silver for play-free insertion. Value retention of the machine: Allows for the uncomplicated replacement of individual segments, eliminating the need for expensive new purchases of the entire board. Specifications: Type: Replacement segments for electronic dartboards Compatibility: Exactly matching the Karella Premium Silver dart machine Material: Impact-resistant and elastic high-grade plastic Version: Available in the various segment types and colors of the original board (depending on selection) Scope of delivery: 1 x Karella Premium Silver replacement segment (in the selected color and version) Tip: Always disconnect the dart machine completely from the power supply before opening the housing to avoid short circuits on the circuit boards. Once you have disassembled the board, it is recommended to carefully check the underlying rubber mat and sensor sheet for stuck remnants of broken tips and remove them. When inserting the new segment, ensure that it slides completely freely in its guide and does not tilt – this is the only way to guarantee that the pressure impulse upon dart impact is cleanly transmitted to the electronics and that the points are counted error-free.

The precisely fitting and extremely robust miss segments for optimal protection of the housing and precise hit separation on your dart machine The original Karella miss segments for the E-Master dart machine are the ideal solution for replacing worn, scratched, or damaged outer areas of your tournament board caused by inaccurate throws. Manufactured from a highly resilient and splinter-free special plastic, these segments reliably catch stray soft darts and protect the underlying electronics and the housing from damage. The precise surface structure catches the darts cleanly and ensures a clear mechanical boundary from the active playing field. Thanks to their exact alignment with the Karella E-Master, the elements can be replaced with precision, immediately restoring your tournament device to its original factory condition both visually and technically. Robust housing protection: The impact-resistant plastic effortlessly absorbs the energy of inaccurate throws and protects the machine from wear. Optimized hole matrix: Enables soft darts to stick securely in the miss area and prevents uncontrolled bounces. Perfect fit: Absolutely identical to the original outer segments of the E-Master for a seamless and play-free installation. Preservation of tournament aesthetics: Renews the visual impression of the outer ring and secures the professional standard of your dart device. Specifications: Type: Replacement miss segments (outer catch ring) Compatibility: Exactly fits the Karella E-Master dart machine Material: Impact-resistant, elastic high-grade plastic Version: Precisely fitting for the outer boundary of the playing field Scope of delivery: 1 x Karella E-Master miss segment (in the selected version) Tip: Before carrying out any maintenance work, completely disconnect the dart machine from the power supply to protect the internal circuit boards from static electricity. Since miss segments often have a supporting or fixing function for the inner segments due to their peripheral position, you should be particularly meticulous about ensuring all parts fit flush when reassembling the housing. Use the disassembly of the outer ring as an opportunity to clean the housing edge of accumulated chalk dust or remnants of broken tips to ensure permanently flawless mechanics.

Ecologically certified PER material and slip resistant structure for perfect floor protection and maximum secure footing at official tournament dimensions The Karella Eco-Star dart mat combines professional training conditions with a consistently sustainable material concept. Designed for ambitious league players and recreational darters, this innovative floor protector protects both sensitive floors and falling dart tips from damage. Thanks to its pollutant-free and odorless composition, Karella sets new standards for a healthy and comfortable playing environment within your own four walls, in the hobby basement, or in the clubhouse. Certified and environmentally friendly PER material: The mat is made of highly elastic "Polymer Environment Resin" (PER), which is completely free of chemical rubber, latex, or unpleasant odors. Due to the strict certification according to European Oeko-Tex Class 1, it is perfectly suited for allergy sufferers and sensitive living areas. Official tournament playing distance: The precisely integrated throw line (oche) is located exactly at the official tournament distance of 237 cm. This ensures absolutely rule-compliant conditions from the first throw, whether playing classic steel darts or soft darts. Excellent anti-slip performance: The approx. 3.5 mm thick structure features an effective anti-slip layer on the underside. It literally suctions itself to the floor, does not form waves, and prevents slipping during dynamic throwing and foot positions, thereby consistently avoiding dangerous tripping hazards. Optimal dimensions and excellent flexibility: With a comfortable total length of 290 cm, the mat offers enough leeway behind the throw line. Available in two widths (60 cm or 80 cm) to perfectly adapt to your space, it is a true lightweight that can be rolled up in a flash for extremely space-saving storage. Specifications: Material: High-quality Polymer Environment Resin (PER) – absolutely latex and rubber-free Certification: Certified according to European Oeko-Tex Class 1 (odorless and skin-friendly) Dimensions: Total length 290 cm, available widths optionally 60 cm or 80 cm, material thickness approx. 3.5 mm (shock-absorbing and durable) Distance marking: Official tournament size at 237 cm Color: Subtle, modern matte black Scope of delivery: 1 x Karella Eco-Star dart mat 60 cm The Tip: This environmentally friendly protective carpet is the perfect sporty basis for your gaming zone and harmonizes perfectly as a professional foundation right next to your billiard table. Caring for the Eco-Star material is incredibly simple: dust and light dirt from chalk residue or footwear can be wiped away effortlessly with a slightly damp cloth without leaving any residue. To guarantee an absolutely flat lying behavior right from the start, roll the mat up once in the opposite direction of the winding direction before the very first game – this way the ends will immediately lay flat on the floor and you can start training right away. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation. When laying it out, always ensure a level, dry surface to fully utilize the anti-slip properties of the underside.

Ecologically certified PER material and non-slip structure for perfect floor protection and maximum stability at official tournament dimensions The Karella Dartmat Eco-Star combines professional training conditions with a consistently sustainable material concept. Developed for ambitious league players and recreational darters, this innovative floor protection shields both sensitive floors and falling dart tips from damage. Thanks to its non-toxic, odorless composition, Karella sets new standards for a healthy and comfortable gaming environment in your own four walls, in the hobby cellar, or at the clubhouse. Certified and eco-friendly PER material: The mat is made from highly elastic "Polymer Environment Resin" (PER), which is completely free of chemical rubber, latex, or unpleasant odors. Due to its strict certification according to the European Oeko-Tex Class 1 standard, it is perfect for allergy sufferers and sensitive living areas. Official tournament throw distance: The precisely integrated throwing line (oche) is positioned exactly at the official tournament distance of 237 cm. This ensures regulation-compliant conditions from the very first throw, whether playing classic steel darts or soft darts. Outstanding anti-slip performance: The approx. 3.5 mm thick structure features an effective anti-slip layer on the underside. It adheres firmly to the floor, does not ripple, and prevents slipping during dynamic throwing stances and footwork, consistently avoiding dangerous tripping hazards. Optimal dimensions for any stance: With a comfortable total length of 290 cm, the mat offers plenty of room behind the throwing line. It is flexibly available in two different widths (60 cm or 80 cm) to adapt perfectly to the spatial conditions of your dart corner. Lightweight with excellent flexibility: Despite its high durability, the mat is a true lightweight and can be rolled up in no time after the match, stored in an extremely space-saving manner, or transported effortlessly. Specifications: Material: High-quality Polymer Environment Resin (PER) – absolutely latex and rubber-free Certification: Certified according to European Oeko-Tex Class 1 (odorless and skin-friendly) Total length: 290 cm Available widths: Choice of 60 cm or 80 cm Material thickness: approx. 3.5 mm (shock-absorbing and durable) Distance marking: Official tournament measure at 237 cm Color: Discreet, modern matte black Scope of delivery: 1 x Karella Dartmat Eco-Star 80 cm Tip: This eco-friendly protective mat is the perfect athletic base for your gaming zone and harmonizes brilliantly as a professional foundation right next to your billiard table. Caring for the Eco-Star material is very simple: dust and light dirt from chalk residue or footwear can be wiped off effortlessly with a slightly damp cloth without leaving any residue. To guarantee a perfectly flat lie from the start, roll the mat in the opposite direction of the packaging coil once before your very first game – this way, the ends will lay flat on the floor immediately, and you can start training right away. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. When laying out the mat, always ensure the surface is level and dry to fully utilize the anti-slip properties of the underside.

The innovative magnetic LED lighting system for a perfectly illuminated and nearly shadow-free dartboard The Winmau Polaris dartboard lighting offers a clever, compact, and highly efficient way to put your board in the right light. Unlike bulky all-around light rings, this system focuses on an elegant 120-degree arc that optimally floods the playing area from above. The modern, warm-white LEDs deliver an impressive luminosity of around 1,200 lumens, effectively minimizing distracting shadows cast by the dart arrows. A true highlight is the innovative mounting: four robust aluminum arms are equipped with powerful magnets that simply adhere to the outer metal rim of the dartboard. The system can be fixed or removed in no time at all, requires no screws in the wall, and can be used flexibly both with and without a catch ring. Shadow-free performance: Powerful LED technology ensures uniform, glare-free illumination of the segments at a professional level. Tool-free magnetic mounting: The sturdy aluminum arms hold rock-solid to the dartboard's steel rim thanks to integrated magnets. Maximum flexibility: Can be used universally with all common sisal boards as well as in combination with or without a surround protection ring. Compact lightweight design: The slim design blends discreetly into any hobby room or club area without restricting the field of vision. Specifications: Type: Magnetic LED dartboard lighting system Luminosity: Approx. 1,200 lumens Light color: Pleasant warm white Illumination angle: 120° overhead light arc Material: Lightweight, robust aluminum Compatibility: Suitable for all classic steel dartboards with a steel outer rim Scope of delivery: 1 x Winmau Polaris LED lighting system (120°) 1 x Power cable including power adapter 1 x Assembly instructions (delivery does not include dartboard and does not include surround) Tip: Clean the metal rim of your dartboard briefly with a dry cloth before attaching to remove any production dust to achieve the maximum magnetic adhesive force. Align the light arc exactly in the center above the single 20 to achieve a perfectly symmetrical light distribution across all triple and double fields down to the bullseye. If you regularly rotate your dartboard to minimize wear, you do not need to laboriously dismantle the lighting system thanks to the magnetic attachment—simply pull the Polaris off briefly, rotate the board to the desired position, and clip the aluminum arms back on in seconds.

The sophisticated 360-degree lighting system for absolutely shadow-free illumination and maximum precision on the dartboard The Winmau Plasma dartboard lighting system sets new standards in visibility and ensures professional playing conditions in any dart setup. With a brightness of 2,000 lumens, the built-in premium LEDs illuminate the entire board perfectly evenly, eliminating any shadows cast by dart arrows or the throwing hand. The robust aluminum ring is mounted directly to the wall via discreet and stable support arms, ensuring the system remains absolutely vibration-free even during the hardest impacts. Whether in professional tournament play or in your home dart cellar, this modern light corona offers unbeatable contrast, reduces eye strain during long training sessions, and ensures that every segment is perfectly in focus. Shadow-free 360° illumination: The circular LED arrangement guarantees seamless light distribution without annoying shadows on the board. Enormous luminosity: Powerful 2,000-lumen LEDs produce a clear, daylight-white light for optimal contrast ratios. Maximum stability: The direct and secure wall mounting prevents the light ring from wobbling or shifting when retrieving arrows. Universal compatibility: Fits perfectly around every standard sisal dartboard and can be effortlessly combined with all common surrounds. Specifications: Type: Professional LED dartboard lighting system Brightness: 2,000 lumens Ring material: Lightweight and robust aluminum frame Diameter: Approx. 73 cm Scope of delivery: 1 x Winmau Plasma LED light ring 3 x Stable mounting arms including mounting screws 1 x Power supply unit with cable Tip: During installation, ensure the support arms are positioned evenly so that the light ring is perfectly centered around your dartboard. Since the system is mounted to the wall completely independently of the surround, you can rotate or replace the surround or the board at any time without having to remove the lighting. The cable can be guided elegantly behind the surround or through a small cable duct downwards to maintain a clean and tidy look. Clean the LED strip carefully with a dry duster if necessary to maintain full brightness in the long term.

The highly sensitive and precisely fitting sensor matrix for absolutely error-free and lightning-fast scoring of your professional dart machine The original Karella matrix sheet is the electronic heart of the E-Master dart machine and ensures that every one of your throws is registered exactly. If the scoreboard glitches, segments stop responding, or miscalculations disrupt the match, this precisely fitting replacement restores the machine's full performance. Equipped with sophisticated conductive tracks and extremely durable contact points, the foil reacts precisely to the mechanical pressure impulse of incoming soft darts. Thanks to its exact tuning to the electronics of the commercial Karella E-Master, the spare part can be mounted with precision, allowing your dart station to operate at a professional level again immediately. Exact impulse transmission: The fine, highly conductive sensor tracks guarantee error-free registration of all segments in fractions of a second. Outstanding durability: Manufactured from a robust, flexible carrier material that effortlessly withstands the permanent stresses of intensive daily play. Optimal fit: Absolutely identical to the factory-installed foil for uncomplicated and secure replacement in the E-Master. Reliable contact security: Effectively prevents annoying counting errors or dropouts on single, double, and triple hits. Specifications: Type: Electronic sensor sheet (matrix) for dart machines Compatibility: Exactly fits the Karella E-Master dart machine Material: Highly flexible carrier foil with specialized conductive contact layers Function: Electronic detection and transmission of mechanical dart hits Scope of delivery: 1 x Karella E-Master matrix sheet (sensor foil) Tip: Before installation, be sure to disconnect the dart machine completely from the power supply to protect the sensitive circuit boards from static electricity or short circuits. When changing the foil, thoroughly clean the backs of the plastic segments as well as the rubber mat with a soft, dry cloth to remove dust and remnants of broken tips. When placing the new matrix, ensure meticulously that it lies completely flat and without kinks or offsets on the mount, so that the ribbon cable plugs into the mainboard without tension and all contacts trigger evenly.

The precisely fitting and extremely impact-resistant replacement segments for quick repair and professional tournament characteristics of your dart machine The original Karella replacement segments for the E-Master dart machine are the perfect solution for replacing heavily used or damaged sections of your electronic dartboard in no time. Manufactured from a highly resilient, dimensionally stable special plastic, they reliably absorb the impact of incoming soft darts and minimize annoying bouncers. The precisely engineered hole matrix guarantees top-class penetration of the dart tips and ensures that every hit is transmitted absolutely error-free to the electronic contact sheet of the machine. Thanks to the precise alignment with the Karella E-Master, the replacement can be carried out effortlessly, so that your professional training or tournament device is immediately fully operational again. Commercial tournament quality: The specialized plastic is extremely durable, splinter-free, and withstands even the harshest stresses in continuous operation. Optimized hole geometry: Ensures easy penetration of the plastic tips and facilitates the residue-free removal of broken tip remnants. Perfect fit: Absolutely identical to the original parts of the E-Master for seamless and play-free insertion into the housing. Cost-efficient maintenance: Allows for the targeted replacement of individual segments, eliminating the need to replace the entire expensive tournament board. Specifications: Type: Replacement segments for electronic dartboards Compatibility: Exactly fits the Karella E-Master dart machine Material: Impact-resistant and elastic high-grade plastic Version: Available in the various segment types and colors of the original board (depending on selection) Scope of delivery: 1 x Karella E-Master replacement segment (in the selected color and version) Tip: Before opening the housing, be sure to disconnect the dart machine completely from the power supply to avoid short circuits on the circuit boards. Once you have disassembled the board for the exchange, it is recommended to carefully clean the underlying rubber mat and sensor sheet of any remnants of broken tips or dust. When inserting the new segment, ensure that it slides completely freely in its guide and does not tilt – this is the only way to guarantee that the pressure impulse upon dart impact is cleanly transmitted to the electronics and that the points are counted error-free.

Innovative two-leg plug-in system and maximum stability for flexible dart matches without drilling into walls The Winmau Vertex dartboard stand revolutionizes the mobile dart experience and offers the perfect technical solution for all players seeking maximum flexibility without permanent wall damage. Thanks to its groundbreaking, stable leaning design, this mobile setup can be assembled in no time, positioned stably, and stored in a space-saving manner after the match – ideal for travel, rental apartments, or outdoor use. Advanced two-leg construction: Instead of standing freely in the room, the stand uses an intelligent plate design that leans stably and securely against the wall. Together with the precise screw and plug-in system, wobbling or tipping during throws is effectively prevented. Completely drill-free assembly: Holes in walls or tedious dowel work are a thing of the past. The stand is simply set up, perfectly absorbs the kinetic energy of incoming darts, and protects the structure of your living spaces. Outstanding portability: Thanks to the light yet highly robust material and the well-thought-out plug-in segments, the entire construction can be dismantled in just a few steps and transported comfortably in the included, compact carrying bag. Universal board compatibility: The mounting system is precisely matched to accommodate all common tournament sisal boards (bristle boards), allowing you to take your professional board with you wherever you go. Specifications: Construction: Stable two-leg dartboard stand with a clever wall-leaning plate Mounting type: Tool-free, uncomplicated plug-in and screw system Compatibility: Suitable for all common steel dartboards (e.g., Winmau Blade series) Mobility: Extremely portable and can be dismantled to save space Scope of delivery: 1 x Winmau Vertex dartboard stand 1 x 3-piece special surround (lightweight rim) 1 x Practical, custom-fit carrying bag Tip: This innovative Vertex stand is the perfect athletic addition for a flexible match and can be positioned directly next to your billiard table in no time if needed. Since the system is fixed against the wall by its own weight and the perfect angle of inclination, it is recommended to place the stand on a non-slip surface or a dart mat. The included 3-piece surround is easy to assemble and provides a visually clean finish for your mobile dart station. Please note: Since every screen displays colors individually, the shade of the item may vary from the representation.