Arthur Cue Glossary:
LD - Low Deflection; i.e., a shaft with minimal deflection
LD Solid Wood - Low-deflection shaft made of solid wood, not a laminated shaft (such as 314 or Z shafts)
RS - Stands for Ralf Souquet and a long taper—the type played by "The Kaiser"—featuring a long, gradual slope
WBS - Stands for Weight Balance System and the option to insert weight into the shafts
The Extension Weight Screw is the necessary counterpart to our extension. It is available in aluminum (approx. 7 g) and steel (approx. 19 g). Additional weight can be added using the set screws.
The Extension Weight Screw is the necessary counterpart to our extension. It is available in aluminum (approx. 7 g) and steel (approx. 19 g). Additional weight can be added using the set screws.
Extend your cue in an instant! Thanks to our patented quick-release system, a mere 10-degree turn is all that is required to secure the extension. It doesn't get any faster or more efficient than this! Available in 50 mm, 100 mm, 150 mm, and 200 mm lengths. The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension thread. Each extension is made to order; production time is approximately 4 weeks. Can't find the wood type you're looking for? Please send us an email at info@billard-dienst.de Cues from other manufacturers can generally be converted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a conversion, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image shown *
Note: The extension is intended for continuous use. The connection to the cue is recessed. Weight: 65 g - 2.3 oz. Extend your cue by 75 mm in the blink of an eye! Thanks to our patented quick-release system, only a 10° turn is required to secure the extension. It doesn't get any faster or more effective! The Arthur Cue Bumper is modified and remains permanently on the cue. This item is suitable for cues already equipped with an extension screw. Cues from other manufacturers can generally be converted/modified to fit our extension system. Please send us an email at info@billard-dienst.de for further information and a non-binding price quote. For a potential conversion, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may vary from the image
Extend your cue in an instant! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! Available in black and white, in lengths of 150 mm or 200 mm. The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension screw. Each extension is made to order; production time is approx. 2–3 weeks. Cues from other manufacturers can generally be converted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a non-binding price quote. If you wish to have your cue converted, please send it to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 150 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 150 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Note: The extension is intended for continuous use. The connection to the cue is recessed. Weight: 52 g - 1.8 oz. Extend your cue by 75 mm in the blink of an eye! Thanks to our patented quick-release system, only a 10° turn is required to secure the extension. It doesn't get any faster or more effective! The Arthur Cue Bumper is modified and remains permanently on the cue. This item is suitable for cues already equipped with an extension screw. Cues from other manufacturers can generally be converted/modified to fit our extension system. Please send us an email at info@billard-dienst.de for further information and a non-binding price quote. For a potential conversion, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may vary from the image
Extend your cue by 150 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 150 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 200 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 200 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *
Extend your cue by 150 mm in the blink of an eye! Thanks to our patented quick-release system, a mere 10-degree turn is all that is needed to secure the extension. It doesn't get any faster or more efficient than this! The Arthur Cue Bumper has been modified to remain permanently attached to the cue. This item is suitable for cues that are already equipped with an extension bolt. Cues from other manufacturers can generally be retrofitted or modified to accommodate our extension system. Please send us an email at info@billard-dienst.de for further information and a no-obligation price quote. If you wish to proceed with a modification, please send your cue to: Billard Dienst & Arthur Queue, Siemensstrasse 11, 67227 Frankenthal, Germany * Color may differ from the image *