Moist cleaning cloth, perfect for cleaning joints and carbon fiber shafts. Effectively removes grease and dirt; contains isopropanol alcohol.

A robust and perfectly fitting bumper for reliable protection of your cue butt and your floors The ECO rubber bumper is the essential and functional spare part for one-piece cues, which are used particularly frequently and intensively in clubhouses, schools, or commercial gaming venues. This small but effective accessory reliably protects the bottom end of the wood from splintering when the cue is placed on the floor. At the same time, it prevents sensitive floor coverings from sustaining unsightly scratches or dents and ensures a non-slip stance when resting directly against the billiard table. Effective material protection: The rubber bumper absorbs hard impact forces when placed on tile or wooden floors, protecting the cue end from damage. Non-slip properties: Thanks to the grippy rubber compound, the cue stands absolutely stable against the wall or table without sliding away. High cost-efficiency: The durable ECO version offers an inexpensive and sustainable solution to significantly extend the lifespan of one-piece house cues. Easy installation: The stopper can be attached quickly, easily, and precisely to the end of the cue to be ready for use immediately. Specifications: Type: Rubber bumper / cap for one-piece cues (house cues) Version: ECO (Particularly durable and economical) Material: Elastic, robust rubber Function: Impact protection for wooden butts and sensitive floors Scope of delivery: 1 x Rubber bumper for 1-piece cue ECO Tip: Before attaching the new rubber bumper, you should thoroughly clean the end of the cue of any dirt or adhesive residues to ensure an optimal fit. Since one-piece cues are often heavily used in daily life, it is worth keeping a few of these bumpers in stock as spares. An intact protective bumper ensures that the wood remains dry and cannot absorb moisture from the floor. This keeps your cue in the best possible condition and perfectly protected until you prepare the tip with chalk for your next precise shot. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children, as small parts may pose a choking hazard.

The practical and handy tool for the perfect shape and an optimally scuffed leather tip on your cue The round cue tip trimmer is an indispensable and compact aid for every passionate billiard player who values perfectly maintained equipment. This functional tool was specially developed to effortlessly shape the surface of your glue-on tip and scuff it precisely. This maximizes chalk adhesion, which effectively prevents uncontrolled slipping and noticeably improves precision with every shot directly at the billiard table. Two different radii: Both sides of the trimmer have a different curvature to perfectly adapt the roundness of the tip to your individual playing preferences. Fine grit for optimal scuffing: The high-quality coating allows for an even roughening of the leather surface without damaging the structure of the fibers. High compatibility: The tool is excellently suited for all common glue-on tips with a diameter of 10 mm to 13 mm. Compact PVC construction: Due to the lightweight and robust housing, the accessory is extremely durable and can be easily taken anywhere. Specifications: Material: Robust, durable PVC plastic Shape: Round, double-sided Grit: Fine coating for shaping and scuffing Compatibility: Suitable for glue-on tips from 10 to 13 mm in diameter Scope of delivery: 1 x Round PVC cue tip trimmer Tip: For optimal ball control, the tip of your cue should always have an even curvature. Simply place the round trimmer on the tip and rotate it with light, even pressure to achieve a perfect curve. Regularly scuffing the surface ensures that the chalk penetrates deep into the pores and adheres optimally. Thanks to its flat and compact shape, this useful helper fits into even the smallest accessory compartment of your cue case.

The stable and perfectly fitting component for professional repair and optimal power transmission on your cue The stable universal pool ferrule is the ideal spare part to sustainably secure the performance of your shaft. Crafted in an elegant ivory look, this essential component provides the perfect base for mounting a new glue-on tip. It reliably protects the shaft's wood from cracking during hard shots and absorbs impact energy precisely to ensure consistent ball control with every shot at the billiard table. Robust construction: The material properties are specifically designed to absorb the enormous forces generated during breaks and intensive play without damage. Classic ivory look: The elegant ivory-colored design fits harmoniously and timelessly into the overall appearance of high-quality pool billiard shafts. Precise preparation: The dimensions provide sufficient substance to precisely adapt the component to the individual tip diameter of your shaft during replacement. Optimal adhesive base: The top flat surface is perfectly textured to provide an extremely secure and durable hold for glue-on tips of all hardness levels. Specifications: Type: Universal ferrule for pool billiards (glue-on tip) Color: Ivory Diameter: 13.5 mm Inner diameter: approx. 8 mm Length: 25 mm Scope of delivery: 1 x Universal pool ferrule (13.5 mm) Tip: Precise adjustment of a new ferrule requires craftsmanship. Before applying the glue-on tip, the ferrule must be turned or sanded exactly flush with the shaft's diameter. Use a high-quality cyanoacrylate or special glue for mounting the tip and ensure a perfectly flat contact surface. After hardening, the new tip can be perfectly shaped to achieve optimal chalk adhesion and maximum precision for every shot with your cue. A few of these spare parts belong in every well-stocked cue case as an essential reserve. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children, as small parts pose a choking hazard.

Replacement Abrasive Pads for the Golden Multi Tool Ensure your Golden Multi Tool remains as effective as the day you bought it. Over time, the abrasive surfaces can wear down due to frequent use; these high-quality replacement pads allow you to restore your tool to peak condition for precise leather maintenance. Highlights: Perfect fit: Specifically designed to replace the worn abrasive sections of the Golden Multi Tool. Restores performance: Ensures your shaper and trimmer surfaces regain their original cutting efficiency. Easy to install: Designed for quick and hassle-free application. Longevity: Maintains the versatility of your 5-in-1 tool, saving you from having to replace the entire unit. Specifications: Application: Replacement abrasive set for the Golden Multi Trimmer Content: High-quality adhesive-backed abrasive material Tip: Before applying the new adhesive pads, ensure the surfaces of the tool are completely clean and free of old glue residue or dust to guarantee a durable and long-lasting bond.

The handy and affordable solution for quick shaping and reliable scuffing of the leather tip right at your playing venue The standard PVC tip sanding file is an indispensable tool for the regular maintenance of your equipment. This compact sanding file was specially developed to effortlessly bring the surface of your glue-on tip into the desired shape and to roughen the structure evenly. An optimally prepared tip ensures excellent chalk adhesion, which minimizes uncontrolled slipping on the ball and noticeably improves precision with every shot directly at the billiard table. Effective shaping & scuffing: The sanding surface allows you to quickly loosen hardened leather and restore the perfect curvature of the tip. Economic ECO choice: The functional design offers an especially inexpensive and durable solution for regular maintenance in hobby and club settings. Handy dimensions: With its compact size, the file sits optimally in the hand and enables controlled, even processing of the leather. Robust PVC housing: The resilient material protects the tool during rigorous daily training and ensures reliable dimensional stability. Specifications: Type: Tip sanding file for glue-on tips Material: Robust, durable PVC plastic Function: Scuffing, loosening, and shaping the leather surface Dimensions: Approx. 10 x 3 cm Scope of delivery: 1 x Standard PVC tip sanding file Tip: A perfectly maintained surface is the key to consistent ball control and maximum spin. Move your shaft with light, even pressure over the sanding file and rotate it slowly around its own axis to achieve a harmonious curve. Gently roughening the surface opens up the leather structure, allowing the billiard chalk to penetrate deeply and adhere optimally. Thanks to its flat form factor, this useful helper fits into any accessory compartment of your cue case and is ready for use immediately before your next important match to bring your tip into top shape. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children.

8 pieces, for fixing the tip during the gluing process. High-quality, thick rubber bands, reusable. These are used in our own workshop... We explicitly advise against using fixtures made of (sharp-edged) plastic or wood for securing the tip after gluing!

The stable and perfectly fitting component for professional repair and optimal power transmission on your cue The stable universal pool ferrule is the ideal spare part to sustainably secure the performance of your shaft. Crafted in an elegant ivory look, this essential component provides the perfect base for mounting a new glue-on tip. It reliably protects the shaft's wood from cracking during hard shots and absorbs impact energy precisely to ensure consistent ball control with every shot at the billiard table. Robust construction: The material properties are specifically designed to absorb the enormous forces generated during breaks and intensive play without damage. Classic ivory look: The elegant ivory-colored design fits harmoniously and timelessly into the overall appearance of high-quality pool billiard shafts. Precise preparation: The dimensions provide sufficient substance to precisely adapt the component to the individual tip diameter of your shaft during replacement. Optimal adhesive base: The top flat surface is perfectly textured to provide an extremely secure and durable hold for glue-on tips of all hardness levels. Specifications: Type: Universal ferrule for pool billiards (glue-on tip) Color: Ivory Diameter: 13.5 mm Inner diameter: approx. 8 mm Length: 25 mm Scope of delivery: 1 x Universal pool ferrule (13.5 mm) Tip: Precise adjustment of a new ferrule requires craftsmanship. Before applying the glue-on tip, the ferrule must be turned or sanded exactly flush with the shaft's diameter. Use a high-quality cyanoacrylate or special glue for mounting the tip and ensure a perfectly flat contact surface. After hardening, the new tip can be perfectly shaped to achieve optimal chalk adhesion and maximum precision for every shot with your cue. A few of these spare parts belong in every well-stocked cue case as an essential reserve. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children, as small parts pose a choking hazard.

The essential specialized tool for exact, flush trimming of glue-on tips directly at the ferrule The Leather Tip Corrector is the perfect aid for professional installation and maintenance of your equipment. Designed like a clever, oversized pencil sharpener, this tool is dedicated to the precise finishing process after gluing on a new leather tip. Thanks to a generous housing opening and a specifically tapered cutting blade, it effortlessly removes overhanging edges to create a perfectly seamless transition to the ferrule – a fundamental prerequisite for maximum ball control and a clean, responsive feel at the billiard table. Precise edge cutting: The conically arranged blade matches the overhanging material exactly and flush to the diameter of the ferrule. Broad compatibility: The special sharpener is excellently suited for all common glue-on tip sizes with a diameter from 9 mm to 14 mm. Sustainable quality: The high-quality knife blade used is characterized by long durability and can be easily replaced if necessary. Reliable manufacturing: As a quality product labeled "Made in Germany," this tool guarantees highest precision and longevity for regular use. Specifications: Type: Glue-on tip edge trimmer / leather sharpener Housing opening: 17 mm Compatibility: Suitable for glue-on tips from 9 mm to 14 mm in diameter Blade: Durable, replaceable quality knife blade Origin: Made in Germany Scope of delivery: 1 x Leather Tip Corrector (9–14 mm) Tip: When installing a new glue-on tip, it is ideal to choose one a shade larger than the actual ferrule diameter. After the glue has fully cured, place the Corrector over the tip and rotate the shaft with gentle, even pressure. The sharp blade peels off the excess material cleanly without damaging the wood or the ferrule. Afterwards, the new tip is perfectly prepared to be shaped with a trimmer and roughened for optimal chalk adhesion. This handy tool is part of the basic equipment for every professional workshop. Over time, leather tips tend to "mushroom," forming a cap. The Corrector allows you to trim this overhang (10–14 mm). CAUTION: The cue MUST be inserted straight!

The proven and highly effective solution for quick cleaning and a flawlessly smooth glide for your cue shaft The cue shaft polisher (slicker) has been one of the most popular and indispensable maintenance tools in billiards for decades. This smart tool is simply placed over the shaft and moved along it. Thanks to its specially roughened fabric interior, it instantly removes disruptive grease and dirt residues that accumulate during intensive training. The result is a perfectly cleaned shaft that glides silky-smooth through your bridge hand, restoring maximum control for every shot at the billiard table. Effective deep cleaning: The roughened fabric interior reliably absorbs dirt, chalk residue, and hand oils without damaging the wood. Perfect glide effect: The friction gently polishes the wood surface, restoring its original, smooth gliding capability. Decades of proven reliability: A true cult product in billiard accessories, praised for its straightforward handling and enormous efficiency. Highly economical: Its extremely low price makes this slicker the optimal companion for daily equipment maintenance. Specifications: Type: Cue shaft polisher (slicker) Material: Flexible textile composite with a specialized, roughened interior Function: Removal of dirt, chalk dust, and skin oils while simultaneously polishing Application: Suitable for all standard wooden shafts Scope of delivery: 1 x Cue shaft polisher (slicker) Tip: A clean shaft is half the battle for a fluid stroke without friction. Simply slide the slicker over the wood and move it with quick, short up-and-down motions along the shaft. The resulting friction heat slightly opens the wood pores, perfectly removing embedded dirt and noticeably sealing the surface. Due to its extremely flexible and flat nature, this must-have takes up virtually no space—it practically rolls itself into any corner of your cue case and is ready for use immediately between sets. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children.

Restore your wooden shaft to its former glory! Easily remove stubborn chalk marks with this sponge. This sponge provides deep cleaning of the shaft without reducing its diameter. To function correctly, the sponge must be slightly moistened. After cleaning, firmly buff the shaft dry with a soft cloth (or use a tool like the Universal Sportsman Silicone Cloth). Dimensions: approx. 7 x 7 x 2.5 cm. With careful handling, the sponge lasts for approximately 4-5 applications. Benefits: No reduction of the shaft diameter. Chalk residue is effectively removed from the wood pores. Easy to transport and space-saving. No additional chemical products required. Ultra-light sandpaper included. Safety Instructions: Keep out of reach of children; contains small parts that could be swallowed. Do not soak the sponge. For external use only. Video Guide: Watch the official maintenance guide here.

The precision CNC-machined tool made of high-quality Teflon for perfect shaping and maintenance of your leather tip The white Teflon cue tip shaper is a premium and durable tool for any billiard player who makes no compromises in the care of their equipment. Made from robust Teflon and precision-machined using state-of-the-art CNC technology, this tool guarantees absolutely even processing of your glue-on tip. With this handy tool, you can effortlessly bring the tip into the desired curvature to optimize chalk adhesion, prevent uncontrolled slipping on the ball, and significantly increase shot precision directly at the billiard table. CNC-machined precision: Machine manufacturing ensures exact contours and flawless shaping with every use. High-quality Teflon material: The innovative material offers excellent durability, is dimensionally stable, and is particularly comfortable to handle. Perfect curvature control: Enables targeted and even reshaping of the leather surface for ideal ball control. Compact and lightweight: Thanks to its handy design, the accessory can be stored optimally and is ready for use at the playing venue in no time. Specifications: Type: Cue tip shaper Material: High-quality Teflon Manufacturing: CNC-produced Color: White Scope of delivery: 1 x White Teflon cue tip shaper Tip: To achieve consistent ball control and optimal effect when playing with spin, the perfectly rounded shape of the glue-on tip is crucial. Place the Teflon shaper on the tip of your shaft and work the leather with light, even pressure. The CNC-machined contour helps you restore a perfectly symmetrical curvature. Subsequent chalking allows the grip to penetrate deep into the structure. Due to its minimal space requirements, this durable helper fits perfectly into every accessory compartment of your cue case, allowing you to readjust your tip before a match or during training at any time. Please note: As every screen displays colors individually, the shade of the item may vary from the representation. Keep out of reach of small children.

Flawless balls and a clean game in every single frame! The traditional choice for residue-free ball maintenance on the cloth! The classic white Snooker Referee Gloves are an absolute essential for an orderly and clean match. They primarily serve to effectively clear snooker balls of chalk dust and dirt particles when picking them up, spotting them, or cleaning them. At the same time, wearing these gloves reliably prevents disturbing skin oils from getting onto the polished surface of the balls, which actively averts unpredictable "kicks" during gameplay. Crafted from 100% pure, soft cotton, these closed 5-finger gloves offer great wearing comfort and maximum protection for the sensitive material of the balls. The fine fabric structure functions like a gentle polishing cloth during handling. Thanks to the practical universal size, the gloves adapt flexibly, making them the perfect choice for tournament use in clubs as well as for the regular maintenance of personal equipment at home. Details: Model: Snooker Referee Gloves (5-finger design) Color: White Material: 100% Cotton Size: Universal size Fingertips: Completely closed Feature: Protects balls from skin oils and removes chalk dust while being gentle on the material Application: Ideal for referees, tournaments, club operations, or private ball cleaning Scope of delivery: 1x Snooker Referee Gloves Set (consisting of 2 pieces / 1 pair) Please note: Since every screen displays colors individually, the actual tone of the item may vary from the image shown. ```

Essential protection for your cue: Durable joint protectors for 5/16x18 threads! Keep your cue in top condition with these high-quality plastic joint protectors. Designed specifically for the widely used standard 5/16x18 fine thread, they provide a secure and precise fit for both your shaft and butt. The highlights at a glance: Universal fit: Perfectly compatible with the common 5/16x18 thread standard. Optimal protection: Safeguards your delicate threads from dust, moisture, and potential impacts during transport or storage. Precision maintenance: By preventing thread wear, these protectors ensure that your shaft and butt continue to connect seamlessly for a stable, play-free hit. Robust design: Made from high-quality, durable plastic for long-lasting use. Product details: Type: Joint protectors (Set) Thread type: 5/16x18 (standard fine thread) Material: Durable plastic Color: Black Scope of delivery: 1 x Joint protector for the shaft 1 x Joint protector for the butt Tip: Always use your joint protectors when storing your cue in a case to maintain the perfect alignment and longevity of your equipment.

Our recommendation!! 3 tubes of 1 gram each (instead of 1 tube of 3 grams) High flexibility High impact resistance Shock-resistant, tensile-resistant Waterproof No-drip formula 3 x 1 gram (EUR 196.66 per 100 grams) Ideal for: Shatterproof bonding of flexible and porous materials, e.g., rubber, leather, ceramic, wood, cardboard.

High-quality hard fabric ferrule for maximum impact resistance and precision! This robust ferrule, made from high-quality hard fabric (phenolic resin base), is the ideal choice for players who value durability and direct power transmission. Due to its extreme resilience, it optimally protects the shaft of your cue against "mushrooming" and offers a stable base for your glue-on or screw-on system. Highlights at a glance: Excellent durability: Hard fabric is known for its extreme resilience and dimensional stability under harsh conditions. Precise power transmission: Thanks to the high density of the material, the energy of the shot is transferred directly and without loss. Secure mounting: Equipped with an integrated internal thread for a perfect fit on the tenon of your shaft. Protective function: Effectively protects the wood of the shaft from cracks and damage. Product details: Material: High-quality hard fabric (phenolic resin) Outer diameter: 14.2 mm Special features: Includes matching cap and integrated internal thread Application: Ideal for break cues and high-quality playing cues Scope of delivery: 1 x Hard fabric ferrule (14.2 mm) with cap Please note: As this is a technical component, please ensure that the diameter and thread are compatible with your shaft. Colors may vary slightly depending on monitor settings.

Bring your shaft to a flawless, high-gloss finish with natural leather care! Gentle deep cleaning: High-quality natural leather effectively removes residue from chalk, perspiration, and dirt without damaging the wood structure of your shaft. Perfect surface smoothing: The heat generated by friction seals the pores of the wood, providing an extremely smooth glide for your bridge hand. Handy format: With a compact size of 10 x 10 cm, the shaft polisher fits perfectly in your hand, allowing for precise care right up to the ferrule. Durable natural product: The robust nature of the leather ensures an extremely long lifespan, making it an essential companion for every cue case. Specifications: Material: High-quality genuine leather Dimensions: 10 x 10 cm Function: Cleaning, smoothing, and polishing the shaft Feature: Seals wood pores through natural frictional heat Scope of delivery: 1 x KrearLeather Shaft Polisher (leather polishing cloth), currently available in blue Pro Tip: Rub the shaft with quick up-and-down movements until a slight warmth develops—this achieves the best cleaning effect and a noticeably smoother surface at the billiard table. Please note: As every screen displays colors individually, the shade of the item may vary from the representation.

The professional treatment for your shaft – smooth surfaces for maximum control! The Winner's Cue Paper Set is one of the most popular tools for the intensive cleaning and care of cue shafts. These special hand pads utilize high-quality 3M technology from the USA, allowing you to perfectly prepare the wood in several steps. Through the use of different micron grades, dirt and chalk residues are gently removed, and the wood pores are sealed in the final step, guaranteeing an exceptionally smooth playing feel. Highlights at a glance: 3-piece set with different micron coatings for cleaning and finishing Step-by-step application: From 30 microns (cleaning) to 9 microns (smoothing and sealing pores) Durable and sustainable: The pads are washable and therefore reusable High-quality 3M technology for professional results Product details: Dimensions per pad: approx. 8 x 5 cm Easy handling for regular maintenance at home or in the club Scope of delivery: 1x Winner's Cue Paper Set (3 pads) Please note: As every screen displays colors individually, the shade of the item may vary from the representation.

The metal tip pick/aerator is a small, essential hand tool used for the maintenance of your cue tip. Purpose: It is designed to roughen or texture the surface of the leather tip to noticeably improve the adhesion of billiard chalk. Material: These tools are often made of high-quality, heavy-duty metal to ensure they feel solid in the hand and offer long-lasting durability. Application: By lightly tapping or pressing the rough, rasp-like side of the tool onto the cue tip, the surface is perforated, which optimizes the tip's ability to hold chalk.

Silky effect/lubricant for wooden shafts: apply a few drops to the shaft and rub in with a (microfiber) cloth; the shaft will glide wonderfully! 10 ml pump bottle